Show Vrrp - Dell S6100 Configuration Manual

Version
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Example
Dell(conf-if-vrid-4)# show config
vrrp-group 4
!
Dell(conf-if-vrid-4)#

show vrrp

View the VRRP groups that are active. If no VRRP groups are active, the Dell Networking OS returns No Active VRRP group.
Syntax show vrrp [vrrp-id][brief][interface type][ipv6][interface type][vrf vrf-name]
Parameters
vrrp-id
brief
interface type
1716 Virtual Router Redundancy Protocol (VRRP)
Description
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
virtual-address 119.192.182.124
(OPTIONAL) Enter the virtual router identifier for the VRRP group to view only that
group. The range is from 1 to 255.
(OPTIONAL) Enter the keyword brief to view a table of information about the VRRP
groups.
(OPTIONAL) Enter the following keywords and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.