Enable - Dell S6100 Configuration Manual

Usage Information
Each contact person must be unique by their name.
You can configure only one contact person.
It is not possible to remove the first name or last name. The no form of the command removes the entire contact-
person entry.
This command is optional for SupportAssist service configuration.

enable

Enable all activities and severs for the SupportAssist service.
Syntax enable all
To disable the SupportAssist activities temporarily, use the no enable all command.
Parameters
all
Defaults Enabled or All Enabled
Command Modes SUPPORTASSIST
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
9.9(0.0)
server
Configure the name of the remote SupportAssist Server and move to SupportAssist Server mode.
Syntax server {default | server-name}
To delete a server, use the no server server-name command.
Parameters
default
server-name
Defaults Default server has URL stor.g3.ph.dell.com
Command Modes SUPPORTASSIST
1584 SupportAssist
Enter the keyword all to enable all SupportAssist service activities.
Description
Introduced on the M I/O Aggregator and FN IOM.
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Enter the keyword default for the default server.
Enter the name of the custom server to which the logs would be transferred. To include a
space, enter a space within double quotes.