Vni-Profile - Dell S6100 Configuration Manual

To remove the association, use the no vnid command.
Parameters
VNID-Range
Defaults None.
Command Modes

VNI-PROFILE

Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version
9.11(0.0)
Usage Information Use this command to associate the specified range of VNIDs to a VNI profile.
vni-profile
Create a VNI profile to associate with remote VTEP configuration.
Syntax vni—profile profile name
To delete the VNI profile, use the no vni-profile command.
Parameters
profile name
Defaults None
Command Modes VXLAN-INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version
9.11(0.0)
Usage Information Use this command to create a VNI profile with a unique profile name to associate with remote VTEP. You can
create a maximum of 1024 VNI profiles and remote VTEP IPs.
vxlan-instance
Enable VXLAN Instance configuration on the platform.
Syntax vxlan-instance instance ID
To delete vxlan-instance from the system, use no vxlan-instance instance ID command.
1696 Virtual Extensible LAN (VXLAN)
Enter the range of VNIDs that need to be members of the specific VNI profile. The range
is from 1 to 16777215.
Description
Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Enter a valid and unique profile name. The profile name can have a maximum of 32
characters.
Description
Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.