Clear Mac-Address-Table Dynamic All - Dell S6100 Configuration Manual

Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide
Version
9.11(0.0)
Usage Information Use this command to clear the remote VTEP and access port statistics.

clear mac-address-table dynamic all

Clear the MAC address table of all MAC address learned dynamically. It clears both MAC address of the VXLAN and legacy VLAN.
Syntax clear mac-address-table dynamic all
Parameters
instance ID
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide
Version
9.10(0.0)
9.8(1.0)
9.8(0.0)
9.7(0.0)
9.4.(0.0)
controller
Configures controller for the VXLAN instance on the platform.
Syntax controller controller ID ip address port port-number tcp|ptcp|pssl|ssl
Parameters
controller ID
ip address
port port-number
tcp
ptcp
pssl
ssl
Description
Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial
release.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048–ON.
Introduced on the S6000-ON.
Introduced on the S6000.
Enter the controller ID.
Enter the IP address of the controller.
(OPTIONAL) Enter the keyword port and the port number.
The range is from 1 to 6632. The default port number is 6632.
(OPTIONAL) Enter the keyword tcp to configure tcp connection to controller.
(OPTIONAL) Enter the keyword ptcp to configure passive tcp connection to controller.
(OPTIONAL) Enter the keyword pssl to configure passive ssl connection to controller.
(OPTIONAL) Enter the keyword ssl to configure ssl connection to controller (Default).
Virtual Extensible LAN (VXLAN) 1691