Show Crypto - Dell S6100 Configuration Manual

show crypto

Display the public part of the SSH host-keys.
Syntax
show crypto key mypubkey {rsa | rsa1}
Parameters
Key
mypubkey
rsa
rsa1
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
pre-6.1.1.0
Usage Information This command is useful if the remote SSH client implements Strict Host Key Checking. You can copy the host key
to your list of known hosts.
Example
Dell# show crypto key mypubkey rsa1
1024 65537 15047757832969676203444203678896349387088507047999199481529
2070626705966514872389873388513888726045587485998010070732182414929030
6920275440337838336848081650517187573884981716247894646770656068362720
7710939806628138071534826521901866483832445168871204153163024573977444
9604335364302251481307373438756957374121
1454 Security
NOTE: Some of the parameters in this command require licensing to access. For more information,
contact your Dell Networking representative.
Enter the keyword key to display the host public key.
Enter the keyword mypubkey to display the host public key.
Enter the keyword rsa to display the host SSHv2 RSA public key.
Enter the keyword rsa1 to display the host SSHv1 RSA public key.
NOTE:
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
If you enable FIPS mode, this parameter is not available.