Tacacs-Server Vrf - Dell S6100 Configuration Manual

Parameters
encryption-type
key
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
7.6.1.0
7.5.1.0
pre-6.2.1.1
Usage Information The key configured with this command must match the key configured on the TACACS+ daemon.

tacacs-server vrf

Create an association between a TACACS server group and a VRF and source interface.
Syntax tacacs-server vrf vrf-name [source-interface interface]
To delete the association between a TACACS server group and a VRF and source interface, use the no tacacs-
server vrf vrf-name [source-interface interface] command.
Parameters
vrf vrf-name
(OPTIONAL) Enter either zero (0) or 7 as the encryption type for the key entered. The
options are:
• 0 is the default and means the key is not encrypted and stored as clear text.
• 7 means that the key is encrypted and hidden.
Enter a text string, up to 42 characters long, as the clear text password. Leading spaces
are ignored.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Authentication key length increased to 42 characters.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keyword vrf and then the name of the VRF to associate a TACACS server
group with that VRF.
Security 1421