Radius-Server Retransmit - Dell S6100 Configuration Manual

Version
7.6.1.0
7.5.1.0
pre-6.2.1.0
Usage Information
The key configured on the switch must match the key configured on the RADIUS server daemon.
If you configure the key parameter in the radius-server host command, the key configured with the
radius-server key command is the default key for all RADIUS communications.
Related Commands
•

radius-server retransmit

Configure the number of times the switch attempts to connect with the configured RADIUS host server before declaring the RADIUS host
server unreachable.
Syntax radius-server retransmit retries
To configure zero retransmit attempts, use the no radius-server retransmit command.
To return to the default setting, use the radius-server retransmit 3 command.
Parameters
retries
Defaults 3 retries
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
1414 Security
Description
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
radius-server host — configures a RADIUS host.
Enter a number of attempts that the Dell OS tries to locate a RADIUS server. The range is
from zero (0) to 100. The default is 3 retries.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.