Defaults
none
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.5(0.0)
Examples
Dell# show role mode configure username
Role access: sysadmin
Dell# show role mode configure management route
Role access: netadmin, sysadmin
Dell# show role mode configure management crypto-policy
Role access: secadmin, sysadmin
Related Commands
•
show userroles
Display information on all defined user roles.
Syntax
show userroles
Example
Dell# show userroles
Role
netoperator
netadmin
secadmin
sysadmin
netoperator
testadmin
Command Modes
EXEC Privilege
1470
Security
•
interface
•
line
•
route-map
•
router
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the Z9000, S6000, S4820T, S4810, MXL
userrole
— create user roles.
Inheritance
netadmin
Modes
Exec
Exec Config Interface Line Router IP
Route-map Protocol MAC
Exec Config
Exec Config Interface Line Router IP
Route-map Protocol MAC
Exec Config Interface Line Router IP
Route-map Protocol MAC