Ip Ssh Challenge–Response–Authentication - Dell S6100 Configuration Manual

Parameters
1-10
Defaults 3
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
pre-6.1.1.0
Usage Information This command specifies the maximum number of attempts to authenticate a user on an SSH connection with the
remote host for password authentication. SSH disconnects when the number of password failures exceeds
authentication-retries.
ip ssh challenge–response–authentication
Enable challenge response authentication for SSHv2.
Syntax ip ssh challenge-response-authentication enable
To disable the challenge response authentication, use the no ip ssh challenge-response-
authentication enable command.
Parameters
enable
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
1440 Security
Enter the number of maximum retries to authenticate a user. The range is from 1 to 10.
The default is 3.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keyword enable to enable the challenge response authentication for SSHv2.