Virtual routing and forwarding (VRF) allows multiple instances of a routing table to coexist on the same router at the same time.
Topics:
•
ip unknown-unicast
•
ipv6 unknown-unicast
•
description
•
ip vrf forwarding
•
ip http vrf
•
ip route-export
•
ip route-import
•
ipv6 route-export
•
ipv6 route-import
•
match source-protocol
•
redistribute
•
interface management
•
maximum dynamic-routes
•
show ip vrf
•
show run vrf
ip unknown-unicast
Enable IPv4 catch-all route.
Syntax
ip unknown-unicast [vrf vrf-name]
To remove the IPv4 catch-all route (0.0.0.0/0) from the LPM route forwarding table in hardware which gets added
as a default configuration after the initialization of FIB Agent module, use the no ip unknown-unicast
command.
Defaults
None
Parameters
vrf vrf-name
Command Modes
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Virtual Routing and Forwarding (VRF)
(Optional) Enter the keyword vrf followed by the name of the VRF to enable catch-all
routes corresponding to that VRF.
Virtual Routing and Forwarding (VRF)
58
1649