Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
9.9(0.0)
Usage Information
The server-name is used as a reference only and is not required to be used as part of a URL definition.
There is a reserved name of default for the default server at stor.g3.ph.dell.com. You can customize the defaults
for this server by entering the server default command and use the custom commands.
You can configure one additional server.
SupportAssist Activity Commands
Dell Networking OS supports the following SupportAssist Activity mode commands.
action-manifest get
Copy an action-manifest file for an activity to the system.
Syntax
action-manifest get tftp | ftp | flash <file-specification> <local-file-name>
Parameters
file-specification
local-file-name
Command Modes
SUPPORTASSIST ACTIVITY FULL-TRANSFER
SUPPORTASSIST ACTIVITY EVENT-TRANSFER
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
Description
Introduced on the M I/O Aggregator and FN IOM.
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Enter the full file specification for the action-manifest file. For example:
•
tftp://hostip/filepath
•
ftp://userid:password@hostip/filepath
•
scp://userid:password@hostip/filepath
Enter the name of the local action-manifest file, up to 32 characters long. Allowable
characters are: a to z, A to Z, 0 to 9, -, _, and space.
Description
Introduced on the M I/O Aggregator and FN IOM.
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
SupportAssist
1585