Logging History Size - Dell S6100 Configuration Manual

Version
E-Series legacy
command
Usage Information When you configure the snmp-server trap-source command, the system messages logged to the history
table are also sent to the SNMP network management station.
Related Commands
•

logging history size

Specify the number of messages stored in the Dell Networking logging history table.
Syntax logging history size size
To return to the default values, use the no logging history size command.
Parameters
size
Defaults 1 message
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
E-Series legacy
command
Usage Information When the number of messages reach the limit you set with the logging history size command, older
messages are deleted as newer ones are added to the table.
Description
show logging — displays information logged to the history buffer.
Indicate a value as the number of messages to be stored. The range is from 0 to 500. The
default is 1 message.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Simple Network Management Protocol (SNMP) and Syslog 1529