Dei Enable - Dell S6100 Configuration Manual

dei enable

Enable packets to be dropped based on their DEI value.
Syntax dei enable
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.3.1.0
Usage Information When packets are colored green; no packets are dropped.
dei honor
Honor the incoming DEI value by mapping it to a Dell Networking OS drop precedence. Enter the command once for 0 and once for 1.
Syntax dei honor {0 | 1} {green | red | yellow}
Parameters
0 | 1
green | red | yellow
Defaults Disabled; Packets with an unmapped DEI value are colored green.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Enter the bit value you want to map to a color.
Choose a color:
• Green: High priority packets that are the least preferred to be dropped.
• Yellow: Lower priority packets that are treated as best-effort.
• Red: Lowest priority packets that are always dropped (regardless of congestion
status).
Description
Introduced on the S6100–ON.
VLAN Stacking 1639