Action-Manifest Remove - Dell S6100 Configuration Manual

•

action-manifest remove

Remove the action-manifest file from Dell Networking OS.
Syntax action-manifest remove <local-file-name>}
Parameters
local-file-name
Command Modes
SUPPORTASSIST ACTIVITY FULL-TRANSFER
SUPPORTASSIST ACTIVITY EVENT-TRANSFER
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
9.9(0.0)
Usage Information To revert to the default action-manifest file, use the action-manifest install command. If necessary, you
can then remove the custom action-manifest file.
Related Commands
•
•
•
action-manifest show
View the list of action-manifest for a specific activity.
Syntax action-manifest show {all}
Parameters
all
Command Modes
SUPPORTASSIST ACTIVITY FULL-TRANSFER
SUPPORTASSIST ACTIVITY EVENT-TRANSFER
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
action-manifest remove — remove the action-manifest file for an activity.
Enter the name of the local action-manifest file. Allowable characters are: a to z, A to Z, 0
to 9, -, _, and space.
Description
Introduced on the M I/O Aggregator and FN IOM.
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
action-manifest get — copy an action-manifest file for an activity to the system.
action-manifest install — configure the action-manifest to use for a specific activity.
action-manifest show — view the list of action-manifest for a specific activity.
Enter the keyword all to view the entire list of action-manifests that are available for an
activity.
SupportAssist 1587