Vxlan-Instance (Vap) - Dell S6100 Configuration Manual

Parameters
instance ID
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0)
9.7(0.0)
9.4.(0.0)
Usage Information You must configure VXLAN globally before using VXLAN-instance. Use the no shutdown command to enable
the VXLAN instance.
Example
Enable VXLAN instance:
Dell(conf)#feature vxlan
Dell(conf)#vxlan-instance 1
Dell(conf-vxlan-inst-1)#no shutdown
Disable VXLAN instance:
Dell(conf)#no vxlan-instance 1
Related Commands feature vxlan

vxlan-instance (VAP)

To configure a VXLAN-Access Port (VAP) in to VXLAN-instance
Syntax vxlan-instance instance ID
To unconfigure VAP, use the no vxlan-instance 1 command.
Parameters
instance ID
Defaults Disabled
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version
9.10(0.0)
Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial
release.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048–ON.
Introduced on the S6000-ON.
Introduced on the S6000.
— Enable VXLAN configuration globally on the platform.
Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial
release.
Description
Introduced on the S6100–ON.
Virtual Extensible LAN (VXLAN) 1697