Support-Assist - Dell S6100 Configuration Manual

Reject the EULA:
Dell(conf)#eula-consent support-assist reject
Aug 24 22:35:38: %STKUNIT1-M:CP %SUPPORT_ASSIST-6-SUPASSIST_EVT: Event monitor
service stopped
I do not accept the terms of the license agreement. The SupportAssist feature
has
been deactivated and can no longer be used.
To enable SupportAssist configurations, accept the terms of the license
agreement
by configuring this command 'eula-consent support-assist accept'.
Dell(conf)#
Dell(conf)#
Aug 24 22:35:49: %STKUNIT1-M:CP %SUPPORT_ASSIST-6-SUPASSIST_PKG_UNINSTALLED:
SupportAssist package uninstalled
Dell(conf)#
Related Commands
•

support-assist

Move to the SupportAssist configuration mode.
Syntax support-assist
To remove all the configuration of the SupportAssist service, use the no support-assist command.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
9.9(0.0)
Usage Information If you reject the EULA, the data is not transmitted to the SupportAssist server.
Related Commands
•
support-assist activate
Launch the configuration wizard that enables SupportAssist service and guides through a series of commands to configure SupportAssist.
Syntax support-assist activate
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
1580 SupportAssist
support-assist — moves to the SupportAssist Configuration mode.
Description
Introduced on the M I/O Aggregator and FN IOM.
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
eula-consent — accept or reject the EULA.