Vlt Proxy Gateway - Dell S6100 Configuration Manual

The virtual link trucking (VLT) proxy gateway feature allows a VLT domain to locally terminate and route L3 packets that are destined to a
Layer 3 (L3) end point in another VLT domain. Enable the VLT proxy gateway using the link layer discover protocol (LLDP) method or the
static configuration. For more information, see the Dell Networking OS Command Line Reference Guide.
Topics:
• proxy-gateway lldp
• proxy-gateway static
• remote-mac-address exclude-vlan
• peer-domain-link port-channel exclude-vlan
• proxy-gateway peer-timeout
• vlt-peer-mac transmit
• show vlt-proxy-gateway
proxy-gateway lldp
Enables the proxy-gateway feature using the LLDP protocol.
Syntax [no] proxy-gateway lldp
Command Modes VLT DOMAIN
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.4(0.0)
Usage Information The configuration is cached and sent to LLDP only in one of the following conditions:
1
2
1662

VLT Proxy Gateway

Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the S4810, S4820T, S6000, and Z9000.
The port-channel connecting the two VLT domains, across the DC, is a VLT LAG.
The protocol lldp command is globally enabled.
VLT Proxy Gateway
59