Supportassist Person Commands - Dell S6100 Configuration Manual

SupportAssist Person Commands

Dell Networking OS supports the following SupportAssist Person mode commands.
email-address
Configure the email addresses to reach the contact person.
Syntax email-address primary email-address [alternate email-address]
To remove an email address, use the no email-address command. To remove the primary and the alternate
email addresses, use the no email-address primary and no email-address alternate commands
respectively.
Parameters
primary email-
address
alternate email-
address
Command Modes SUPPORTASSIST PERSON
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
9.9(0.0)
Usage Information
The email addresses must have the standard form of <username>@<email system> to be considered valid.
This command is optional for SupportAssist service configuration.
Related Commands
•
phone
Configure phone numbers to reach the contact person.
Syntax phone primary phone [alternate phone]
To remove a phone number, use the no phone command. To remove the primary and alternate phone numbers,
use the no phone primary and no phone alternate commands respectively.
Enter the keyword primary then the primary email address for the person.
Enter the keyword alternate then the alternate email address for the person.
Description
Introduced on the M I/O Aggregator and FN IOM.
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
preferred-method — configure the preferred method for contacting the person.
SupportAssist 1591