Snmp-Server Location - Dell S6100 Configuration Manual

snmp-server location

Configure the location of the SNMP server.
Syntax snmp-server location text
To delete the SNMP location, use the no snmp-server location command.
Parameters
text
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
E-Series legacy
command
snmp-server packetsize
Set the largest SNMP packet size permitted. Wen the SNMP server is receiving a request or generating a reply, use the snmp-server
packetsize global configuration command.
Syntax snmp-server packetsize byte-count
Parameters
byte-count
Defaults 8
Enter an alpha-numeric text string, up to 55 characters long.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Enter one of the following values 8, 16, 24 or 32. Packet sizes are 8000 bytes, 16000
bytes, 32000 bytes, and 64000 bytes.
Simple Network Management Protocol (SNMP) and Syslog 1509