Show Vxlan Vxlan-Instance Vtep-Vni-Map - Dell S6100 Configuration Manual

Version
9.11(0.0)
9.10(0.0)
9.8(1.0)
9.8(0.0)
9.7(0.0)
9.4(0.0)
Example
Dell# show vxlan vxlan-instance <1> unicast-mac-remote
Total Local Mac Count:
VNI
4656
Related Commands vxlan-instance- Enable VXLAN Instance configuration on the platform.

show vxlan vxlan-instance vtep-vni-map

Displays information on VTEP to VNI mapping for a specific remote VTEP or all remote VTEPs
Syntax show vxlan vxlan-instance instance ID vtep-vni-map remote-vtep-ip IP-Address
Parameters
instance ID
remote-vtep-ip
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version
9.11(0.0)
Example
Dell# show vxlan 1 vtep-vni-map
Remote Vtep IP
VNI profile
VNID count
VNID list
Remote Vtep IP
VNI profile
VNID count
VNID list
1706 Virtual Extensible LAN (VXLAN)
Description
Introduced the static mode on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON,
S6100–ON, and Z9100–ON.
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048–ON.
Introduced on the S6000-ON.
Introduced on the S6000.
MAC
00:00:01:00:00:01
Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial
release.
Enter the keyword remote-vtep-ip followed by the IP address of the remote VTEP.
EXEC
EXEC Privilege
Description
Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
: 10.10.10.10
: Profile1
: 4
: 100, 200, 300, 400
: 10.10.10.11
: Profile2
: 3
: 100, 200, 500
1
36.1.1.1
TUNNEL