Show Vlt Statistics Igmp-Snoop - Dell S6100 Configuration Manual

show vlt statistics igmp-snoop

Displays the informational packets and IGMP control PDUs that are exchanged between VLT peer nodes.
Syntax show vlt statistics igmp-snoop
Default Not configured.
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
Example
Dell_VLTpeer1#show vlt statistics igmp-snoop
VLT Igmp-Snooping Statistics
-------------------------------
IGMP Info Pkts sent:
IGMP Info Pkts Rcvd:
IGMP Reg Request sent:
IGMP Reg Request rcvd:
IGMP Reg Response sent:
IGMP Reg Response rcvd:
IGMP PDU Tunnel Pkt sent:5
IGMP PDU Tunnel Pkt rcvd:10
IGMP Tunnel PDUs sent:
IGMP Tunnel PDUs rcvd:
unit-id
Configure the default unit ID of a VLT peer switch.
Syntax unit-id [0 | 1]
Parameters
0 | 1
Defaults Automatically assigned based on the MAC address of each VLT peer. The peer with the lower MAC address is
assigned unit 0; the peer with the higher MAC address is assigned unit 1.
Command Modes VLT DOMAIN
Description
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
4
1
1
2
1
1
10
19
Configure the default unit ID of a VLT peer switch. Enter 0 for the first peer. Enter 1 for
the second peer.
Virtual Link Trunking (VLT) 1687