Supportassist - Dell S6100 Configuration Manual

SupportAssist sends troubleshooting data securely to Dell. SupportAssist in this Dell Networking OS release does not support automated
email notification at the time of hardware fault alert, automatic case creation, automatic part dispatch, or reports. SupportAssist requires
Dell Networking OS 9.9(0.0) and SmartScripts 9.7 or later to be installed on the Dell Networking device. For more information on
SmartScripts, see Dell Networking Open Automation guide.
NOTE: SupportAssist is enabled by default on the system. To disable SupportAssist, enter the eula-consent support-
assist reject command in Global Configuration mode and save the configuration.
Topics:
• eula-consent
• support-assist
• support-assist activate
• support-assist activity
• SupportAssist Commands
• SupportAssist Activity Commands
• SupportAssist Company Commands
• SupportAssist Person Commands
• SupportAssist Server Commands
• show eula-consent
• show running-config
• show support-assist status
eula-consent
Accept or reject the end user license agreement (EULA).
Syntax eula-consent {support-assist} {accept | reject}
Parameters
support-assist
accept
reject
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
1578

SupportAssist

Enter the keywords support-assist to either accept or reject the EULA for the
specified service.
Enter the keyword accept to accept the EULA for the specified service.
Enter the keyword reject to reject the EULA for the specified service.
SupportAssist
53