Virtual Router Redundancy Protocol (Vrrp) - Dell S6100 Configuration Manual

Virtual Router Redundancy Protocol (VRRP)

Virtual router redundancy protocol (VRRP) is supported by the Dell Networking OS.
Topics:
• IPv4 VRRP Commands
• IPv6 VRRP Commands
IPv4 VRRP Commands
The following are IPv4 VRRP commands.
advertise-interval
Set the time interval between VRRP advertisements.
Syntax advertise-interval {seconds | centisecs centisecs }
To return to the default settings, use the no advertise-interval command.
Parameters
seconds
centisecs centisecs
Defaults 1 second or 100 centisecs.
Command Modes INTERFACE-VRRP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.0)
9.2(1.0)
9.0.2.0
Enter the number of seconds. The range is from 1 to 255. The default is 1 second.
Enter the keyword centisecs then the number of centisecs in multiples of 25
centisecs. The range is 25 to 4075 centisecs in multiples of 25 centisecs.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Added support for centisecs on the Z9000, S6000, S4820T, S4810, and MXL.
Introduced on the Z9500.
Introduced on the S6000.
Virtual Router Redundancy Protocol (VRRP)
62
1707