Dell S6100 Configuration Manual page 1449

mac hmac-
algorithm
kex key-exchange-
algorithm
port port-number
[version {1 | 2}]
Defaults
•
•
•
Enter the keyword mac then a space-delimited list of hash message authentication code
(HMAC) algorithms supported by the SSH server for keying hashing for the message
authentication.
The following HMAC algorithms are available:
•
hmac-sha1
•
hmac-sha1-96
•
hmac-sha2-256
When FIPS is enabled, the default HMAC algorithm is hmac-sha1-96.
When FIPS is not enabled, the default HMAC algorithms are the following:
•
hmac-md5
•
hmac-md5-96
•
hmac-sha1
•
hmac-sha1-96
•
hmac-sha2-256
Enter the keyword kex and then a space-delimited list of key exchange algorithms
supported by the SSH server.
The following key exchange algorithms are available:
•
diffie-hellman-group-exchange-sha1
•
diffie-hellman-group1-sha1
•
diffie-hellman-group14-sha1
When FIPS is enabled, the default key-exchange-algorithm is diffie-hellman-
group14-sha1.
When FIPS is not enabled, the default key-exchange-algorithms are the following:
•
diffie-hellman-group-exchange-sha1
•
diffie-hellman-group1-sha1,
•
diffie-hellman-group14-sha1
(OPTIONAL) Enter the keyword port then the port number of the listening port of the
SSH server. The range is from 1 to 65535. The default is 22.
(OPTIONAL) Enter the keyword version then the SSH version 1 or 2 to specify only
SSHv1 or SSHv2.
NOTE:
Default listening port is 22.
Default cipher list is 3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc,aes128-ctr,aes192-ctr,aes256-ctr.
When FIPS is enabled, the default is hmac-sha1-96.
If you enable FIPS mode, you can only select version 2.
Security 1449