Clear Storm-Control Pfc Statistics - Dell S6100 Configuration Manual

clear storm-control pfc statistics

Clears the discard state count and cleared count statistics. If the queue is in discard state during clear, the discard state count will start
from 1.
Syntax clear storm-control pfc statistics stack-unit {unit-number} port-set {portpipe-
number}
Parameters
unit-number
portpipe-number
Defaults None
Command Modes EXEC Privilege.
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(0.0)
Usage Information The clear storm-control pfc statistics command is used to clear the discard count and cleared
count statistics on the specified stack unit and port set.
Related Commands show storm-control pfc statistics
and the port set.
show storm-control broadcast
Display the storm control broadcast configuration.
Syntax show storm-control broadcast [interface]
Parameters
interface
Defaults none
Command Modes
•
1554 Storm Control
Enter the stack unit number.
Enter the port set number.
Description
Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.
(OPTIONAL) Enter one of the following interfaces to display the interface-specific storm
control configuration:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
EXEC
— used to view the statistical data of the PFC storm on the specified stack unit