Show Vxlan Vxlan-Instance Physical-Locator - Dell S6100 Configuration Manual

Port Vlan Bindings:
Dell#show vxlan vxlan-instance 1 logical-network
Instance
Total LN count
Dell#$n-instance 1 logical-network n 2a8d5d19-8845-4365-ad04-243f0b6df252
Name : 2a8d5d19-8845-4365-ad04-243f0b6df252
Description :
Tunnel Key : 2
VFI : 28674
Unknown Multicast MAC Tunnels:
Port Vlan Bindings:
Related Commands vxlan-instance

show vxlan vxlan-instance physical-locator

Displays physical locators related to Network Virtualization Overlay (NVO) Gateway.
Syntax show vxlan vxlan-instance instance ID physical—locator [vtep-ip A.B.C.D]
Parameters
instance ID
A.B.C.D
Defaults Disabled
Command Modes VXLAN INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
9.8(1.0)
9.8(0.0)
9.7(0.0)
9.4.(0.0)
Example
Dell#show vxlan vxlan-instance 1 physical-locator
Instance : 1
Tunnel
1702 Virtual Extensible LAN (VXLAN)
Te 1/1/9/1: VLAN: 2 (0x80000001)
: 1
: 1
Name
bffc3be0-13e6-4745-9f6b-0bcbc5877f01
192.168.122.133 : vxlan_over_ipv4 (up)
Te 1/1/1/1: VLAN: 0 (0x80000001),
Fo 1/4/1 : VLAN: 0 (0x80000004),
— Enable VXLAN Instance configuration on the platform.
Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial
release.
Enter the IP address of the VTEP.
Description
Introduced the static mode on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON,
S6100–ON, and Z9100–ON.
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048–ON.
Introduced on the S6000-ON.
Introduced on the S6000.
: count 1
36.1.1.1 : vxlan_over_ipv4 (up)
VNID
4656