Enable - Dell S6100 Configuration Manual

port port-number
username userid
password
encryption-type
password
Defaults encryption-type for the password is 0.
Command Modes SUPPORTASSIST SERVER
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
9.9(0.0)
Usage Information The passwords are stored encrypted in the running configuration.

enable

Enable communication with the SupportAssist server.
Syntax enable
To disable communication to a specific SupportAssist server, use the no enable command.
Defaults Enabled
Command Modes SUPPORTASSIST SERVER
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
1594 SupportAssist
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
NOTE: To use the IPv6 address, the Open Automation package should also
support IPv6 communications. For this purpose, SupportAssist requires Dell
Networking Open Automation 9.10(0.0) package or later.
Enter the keyword port then the TCP/IP port number. The port number range is from
1024 to 65534.
(OPTIONAL) Enter the keyword username then the user ID used for the proxy server.
Enter the keyword password then the encryption-type or the user password.
(OPTIONAL) Enter an encryption type for the password you enter.
• 0 directs the system to interpret the password as clear text.
• 7 indicates that the password is encrypted using a DES hashing algorithm.
Enter a string up to 32 characters long.
Description
Introduced on the M I/O Aggregator and FN IOM.
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Description
Introduced on the M I/O Aggregator and FN IOM.
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.