Dot1X Port-Control - Dell S6100 Configuration Manual

Version
8.3.7.0
7.6.1.0
7.4.1.0
Related Commands
•

dot1x port-control

Enable port control on an interface.
Syntax dot1x port-control {force-authorized | auto | force-unauthorized}
Parameters
force-authorized
auto
force-unauthorized
Defaults none
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.4.1.0
Usage Information The authenticator performs authentication only when port-control is set to auto.
Description
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
interface range — configure a range of interfaces.
Enter the keywords force-authorized to forcibly authorize a port.
Enter the keyword auto to authorize a port based on the 802.1X operation result.
Enter the keywords force-unauthorized to forcibly de-authorize a port.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
Security 1429