Local-Vtep-Ip - Dell S6100 Configuration Manual

Command Modes VXLAN INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0)
9.7(0.0)
9.4.(0.0)
Related Commands vxlan-instance

local-vtep-ip

Set the local IP Address to be used as the source IP for VXLAN tunnels.
Syntax local-vtep-ip IP Address
To disable the settings, use the no local-vtep-ip command.
Parameters
IP Address
Defaults None.
Command Modes VXLAN INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version
9.11(0.0)
Usage Information Use the local-vtep-ip IP Address command to set the local IP Address that would be used as source for
VXLAN tunnels.
max_backoff
Configures time to wait between connection attempts with controller.
Syntax max_backoff time
Parameters
time
Defaults 30000
Command Modes VXLAN INSTANCE
1694 Virtual Extensible LAN (VXLAN)
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048–ON.
Introduced on the S6000-ON.
Introduced on the S6000.
— Enable VXLAN Instance configuration on the platform.
Enter the local IP Address to be used as a source for VXLAN tunnels.
Description
Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Enter the time in milliseconds. The range is from 1000-180000. The default value is 30000.