Dell S6100 Configuration Manual page 1399

To return to the default, use the no password-attributes [min-length number] [max-retry
number] [lockout-period minutes] [character-restriction [upper number] [lower
number] [numeric number] [special-char number]] command.
Parameters
min-length number
max-retry number
lockout-period
minutes
character-
restriction
upper number
lower number
numeric number
special-char
number
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.5(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
(OPTIONAL) Enter the keywords min-length then the number of characters. The
range is from 0 to 32 characters.
(OPTIONAL) Enter the keywords max-retry then the number of maximum password
retries. The range is from 0 to 16.
(OPTIONAL) Enter the keyword lockout-period then the number of minutes. The
range is from 1 to 1440 minutes. The default is 0 minutes and the lockout-period is not
enabled. This parameter enhances the security of the switch by locking out sessions on
the Telnet or SSH sessions for which there has been a consecutive failed login attempts.
The console is not locked out.
(OPTIONAL) Enter the keywords character-restriction to indicate a character
restriction for the password.
(OPTIONAL) Enter the keyword upper then the upper number. The range is from 0 to
31.
(OPTIONAL) Enter the keyword lower then the lower number. The range is from 0 to 31.
(OPTIONAL) Enter the keyword numeric then the numeric number. The range is from 0
to 31.
(OPTIONAL) Enter the keywords special-char then the number of special characters
permitted. The range is from 0 to 31.
The following special characters are supported:
! " # % & ' ( ) ; < = > ? [ \ ] * + , - . / : ^ _ { | } ~ @ $
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced lockout-period option on the Z9500.
Introduced lockout-period option on the Z9000, S6000, S4820T, S4810, and MXL.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Security 1399