Clear Vlt Statistics - Dell S6100 Configuration Manual

clear vlt statistics

Clear the VLT operation statistics.
Syntax clear vlt statistics [arp | domain | igmp-snoop | mac | multicast | ndp]
Parameters
domain
multicast
mac
arp
igmp-snoop
ndp
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.2(0.0)
9.2(0.2)
9.0.2.0
9.0.0.0
8.3.19.0
8.3.12.0
Example
VLT ARP Statistics
----------------
ARP Tunnel Pkts sent:0
ARP Tunnel Pkts Rcvd:0
ARP-sync Pkts Sent:0
ARP-sync Pkts Rcvd:0
ARP Reg Request sent:19
ARP Reg Request rcvd:10
Related Commands
•
Clear the VLT statistics for the domain.
Clear the VLT statistics for multicast.
Clear the VLT statistics for the MAC address.
Clear the VLT statistics for ARP.
Clear the VLT statistics for IGMP snooping.
Clear the VLT statistics for NDP.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the M I/O Aggregator. This command is supported in Programmable-Mux
(PMUX) mode only.
Added multicast and ndp parameters.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
show vlt statistics — displays statistics on VLT operations.
Virtual Link Trunking (VLT) 1671