Logging History - Dell S6100 Configuration Manual

Version
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
E-Series legacy
command
Related Commands
•
•

logging history

Specify which messages are logged to the history table of the switch and the SNMP network management station (if configured).
Syntax logging history level
To return to the default values, use the no logging history command.
Parameters
level
Defaults warnings or 4
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
1528 Simple Network Management Protocol (SNMP) and Syslog
Description
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
logging — enables logging to a Syslog server
logging on — enables logging.
Indicate a value from 0 to 7 or enter one of the following equivalent words:
emergencies, alerts, critical, errors, warnings, notifications,
informational, or debugging. The default is 4 or warnings.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.