street-address
Configure the street address information for the company.
Syntax
street-address {address1} [address2]...[address8]
To remove the street address, use the no street-address command.
Parameters
address1
address2..address8
Command Modes
SUPPORTASSIST COMPANY
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
9.9(0.0)
Usage Information
This command is optional for SupportAssist service configuration.
territory
Configure the territory and set the coverage for the company site.
Syntax
territory company-territory
To remove the company territory information, use the no territory command.
Parameters
company-territory
Command Modes
SUPPORTASSIST COMPANY
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
9.9(0.0)
Usage Information
This command is optional for SupportAssist service configuration.
1590
SupportAssist
Enter the street address for the company.
(OPTIONAL) Enter the street address of the company site. Up to 8 fields are allowed.
Description
Introduced on the M I/O Aggregator and FN IOM.
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Enter the territory name for the company. To include a space, enter a space within double
quotes. Use three-letter country codes like USA, IND, FRA, GER and so on.
Description
Introduced on the M I/O Aggregator and FN IOM.
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.