Ntp Master <Stratum - Dell S6100 Configuration Manual

Defaults Not configured.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.4.1.0
8.3.7.0
6.1.1.0
ntp master <stratum>
Configure the switch as NTP Server.
Syntax ntp master <stratum>
Parameters
ntp
master<stratum>
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.6(0.0)
9.2(1.0)
Description
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for IPv6 multicast addresses.
Introduced on the S4810.
Introduced on the E-Series.
Enter the stratum number to identify the NTP Server's hierarchy.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the S4810, S4820T, S5000, S6000, Z9000, and Z9500.
Introduced on the Z9500.
System Time and Date 1607