Link Aggregation Control Protocol (Lacp) - Dell S6100 Configuration Manual

Link Aggregation Control Protocol (LACP)

This section contains commands for Dell Networks' implementation of the link aggregation control protocol (LACP) for creating dynamic
link aggregation groups (LAGs) — known as "port-channels" in the Dell Networking OS.
NOTE: For static LAG commands based on the standards specified in the IEEE 802.3 Carrier sense multiple access with collision
detection (CSMA/CD) access method and physical layer specifications, see
Topics:
• clear lacp counters
• debug lacp
• lacp long-timeout
• lacp port-priority
• lacp system-priority
• port-channel-protocol lacp
• show lacp
clear lacp counters
Clear port channel counters.
Syntax clear lacp port-channel-number counters
Parameters
port-channel-
number
Defaults Without a Port Channel specified, the command clears all Port Channel counters.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
Enter a port-channel number. The range is from 1 to 4096.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Port Channel Commands .
Link Aggregation Control Protocol (LACP)
27
911