Konica Minolta bizhub C360 Service Manual page 90

Field Service Ver. 2.1 Feb. 2012
[2]
[1]
C. Reinstall procedure
[1]
4. PERIODICAL MAINTENANCE PROCEDURE
[1]
A0EDF2C010DA
[1]
A0EDF2C011DA
A0EDF2C012DA
6. Hold the both sides and lift it to take
out the transfer belt unit [1] a little.
7. Hold the position [1] as shown in the
left and remove the transfer belt unit
[2].
NOTE
• Do not touch the surface of the
Image transfer belt unit.
• Cover the image transfer belt unit
with something such shade cloth to
protect its surface from dust or for-
eign matter.
1. Insert the transfer belt unit [1].
NOTE
• Insert the transfer belt unit with
care not to allow its docking gear to
be damaged by hitting it against the
rail or associated part.
• Do not touch the surface of the
image transfer belt unit.
• Cover the image transfer belt unit
with something such shade cloth to
protect its surface from dust or for-
eign matter.
35