12.3 Settings In The Meter Count; Management Function Choice - Konica Minolta bizhub 362 Service Manual

Field Service Ver. 1.0 Dec. 2008

12.3 Settings in the Meter Count

12.3.1

Management Function Choice

A. Auth. Device
Functions • To set whether or not the authentication device is installed.
Use • Set when the authentication device (PageACSES) is mounted.
NOTE
• When authentication device (PageACSES) is set to ON, one-touch information is
initialized (deleted). Check one-touch information before setting ON/OFF of the
authentication device (PageACSES).
• The modem version of the CS Remote Care is not available when the authentica-
tion device is set.
Setting/ • • The modem menu of the CS Remote Care is not available even it displayed on
Procedure the operation panel.
• When set the authentication device under the modem version of the CS Remote
Care is set, [RAM Clear] of the CS Remote Care should be conducted.
• This setting is valid only when User Auth setting under the following setting is
[OFF], and Account Track is [OFF].
• [Admin. Management] - [Admin. 1] - [Account/User Auth.] - [User Authentication
ON/OFF]
B. Management Device 1
Functions • To set whether or not the management device 1 is installed.
Use • Set when the management device 1 is mounted.
NOTE
• This setting is valid only when User Auth setting under the following setting is
Setting/
[OFF], and Account Track is [OFF].
Procedure
• [Admin. Management] - [Admin. 1] - [Account/User Auth.] - [User Authentication
ON/OFF]
C. Management Device 2
Functions • To set whether or not the management device 2 is installed.
Use • Set when the management device 2 is mounted.
• The default setting is "(Unset)".
Mode 1: Use contact type device (Logout with ID key is not allowed.)
Mode 2: Use non-contact type device (Logout with ID key is allowed.)
NOTE
Setting/
• The modem version of the CS Remote Care is not available when the manage-
Procedure
ment device 2 is set.
• When set the management device 2 under the modem version of the CS Remote
Care is set, [RAM Clear] of the CS Remote Care should be conducted.
• This setting is valid only when User Auth setting under the following setting is
[OFF], and Account Track is [OFF].
• [Admin. Management] - [Admin. 1] - [Account/User Auth.] - [User Authentication
ON/OFF]
"(Unset)" Mode 1
12. Meter Count
Mode 2
213