Feed To Duplex Feed Unit - Gestetner B147 Service Manual

DUPLEX UNIT

6.10.5 FEED TO DUPLEX FEED UNIT

[A]
[C]
[B]
B146D556.WMF B146D557.WMF
This shows how the machine feeds paper back into the machine after side 1 is
printed.
The junction gate [A] diverts the paper from the fusing unit to the lower part of the
inverter unit. After the duplex inverter sensor [B] is activated, the machine waits
until the trailing edge has passed junction mylar 3 [C]. Then, the paper is switched
back and junction mylar 3 directs the paper back into the machine for the second
side.
The next page shows how the paper is fed out to the finisher after both sides are
printed.
B147/B149/B190 6-78 SM