Gestetner B147 Service Manual page 364

COPY SERVICE MODE
7-852 ADF Scan Glass Dust Check Counter
Counts the number of occurrences (0 ~ 65,535) when dust was detected on the
scanning glass of the ADF. Counting is done only if SP4991 1 (ADF Scan Glass Dust
Check) is switched on. Memory All Clear (SP5801) resets this counter to zeror
7-901 [Assert Info]
Records the location where a problem is detected in the program. The data stored in
this SP is used for problem analysis. DFU
7-901-1 File Name
7-901-2 Number of Lines
7-901-3 Location
7-905 [Alert Display]
7-905-10 Wst Oil: Full
Specifies the number of revolutions the development drive motor-K can make after
the message, "Waste Oil Bottle is Almost Full", is displayed.
The machine stops after the motor has made the specified number of revolutions.
This SP specifies the interval from near end to end for the waste oil bottle. 232k
revolutions equals 2.5k prints. If it is set to 464, the end condition is 5.0k prints after
near end.
7-905-14 Oil: Alert: Page
Specifies the number of sheets the machine can output after the oil supply reaches
the near-end condition.
7-906 [PM Counter: Previous]
(Sheets or Rotations, Unit, [Color]), Dev.: Development Unit
Displays the number of sheets printed with the previous maintenance units.
7-906-1 S:PCU [K]
7-906-2 S:PCU [Y]
7-906-3 S:PCU [M]
7-906-4 S:PCU [C]
7-906-5 S:Dev. [K]
7-906-6 S:Dev. [Y]
7-906-7 S:Dev. [M]
7-906-8 S:Dev. [C]
7-906-9 S:Oil Supply
7-906-10 S:Fusing
Displays the number of revolutions for motors or clutches in the previous
maintenance units.
7-906-11 R:PCU [K]
7-906-12 R:PCU [Y]
7-906-13 R:PCU [M]
7-906-14 R:PCU [C]
7-906-15 R:Dev. [K]
7-906-16 R:Dev. [Y]
7-906-17 R:Dev. [M]
7-906-18 R:Dev. [C]
7-906-19 R:Oil Supply
7-906-20 R:Fusing
Displays the number of sheets printed with the previous maintenance unit or toner
cartridge.
7-906-21 S:Waste Toner
B147/B149/B190
*BCU [ 232 to 464 / 232 / 1 kilo-revolutions/step ]
*BCU [ 25.0 to 27.5 / 27.5 / 0.1 kilo-sheets/step ]
*BCU [ 0 to 9999999 / 0 / 1 sheet/step ]
*BCU [ 0 to 9999999 / 0 / 1 revolution/step ]
*BCU [ 0 to 9999999 / 0 / 1 sheet/step ]
5-76 SM