Gestetner B147 Service Manual page 351

Rev. 06/2004
5-997-6
By-pass Paper Size
Selects the paper size for making a test pattern from the by-pass table.
5-997-7 Print
Prints the test pattern with the settings specified with SP5-997-001 to 006.
NOTE: When exiting the SP mode, the test print mode is automatically canceled.
5-998 [Memory Clear]
NOTE: For more information, see "NOTE 1" following this table.
5-998-1 ENG Setting
5-998-2 ENG Counter
5-999 New Unit Set
5-999-1 PCU: Bk
5-999-2 PCU: Y
⇒
5-999-3 PCU: M
5-999-4 PCU: C
5-999-5 Dev. U: Bk
5-999-6 Dev. U: Y
5-999-7 Dev. U: M
5-999-8 Dev. U: C
5-999-9 Fuser
SM
[0 to 3 / 0 / 1/step ] Alphanumeric
0: A4 LEF
2: A3
Clears the engine settings except for counters.
Clears all counters.
*BCU [0: Disable/1: Enable]
#
This program makes the machine to start the
initialization processing for a newly installed
unit. You set "1: Enable" before installing a
new unit.
5-63
COPY SERVICE MODE
1: LT LEF
3: DLT
B147/B149/B190