Gestetner B147 Service Manual page 44

MACHINE INSTALLATION
⇒
10. Attach the cloth holder [A] to the left side of the
scanner unit.
11. Place the contact glass cleaning cloth [B] in the
holder.
12. Remove the guide cover [C].
13. Attach the duplex inverter guide [D].
14. Re-attach the guide cover.
15. Attach the appropriate model name decal [A] to
the front cover.
16. Pull each paper tray out, and adjust the side
guides and end guide to match the paper size.
NOTE: To move the side guides, first pull out
the tray fully, then push down the green
lock at the rear inside the tray.
17. Attach the appropriate paper tray number
decals [B] to the paper trays.
NOTE: Paper tray number decals are also used
for the optional paper tray or the
optional LCT. Keep any remaining
decals for use with these optional units.
18. Install the optional ARDF or the optional platen
cover.
B147/B149/B190
[B]
[C]
[A]
[D]
[A]
1-10
Rev. 10/2004
B146I936.WMF
B146I003.WMF
B146I928.WMF
[B]
SM