Verifying A Successful Update - Gestetner B147 Service Manual

5.6.4 VERIFYING A SUCCESSFUL UPDATE

Follow this procedure to verify that a module has been updated successfully.
1. Switch off the main power switch.
2. If the SD card is not in the machine, insert it into SD Card Slot 3.
3. Switch the main power switch on. After about 45 seconds, the initial screen
appears on the LCD in English.
4. Press "Firmware (1)" to open the firmware update screen.
SM
Update Menu
Firmware (1)
Language Data(2)
PCcard -> ROM Page01
ROM: G0000000
Printer (1)
ROM: 0.01
ROM: B0705254
Engine (2)
ROM: 2.16:16
OpePanel.DOM (3) ROM: B0705370
ROM: 1.22
5-147
FIRMWARE UPDATE
Exit(0)
B146S923.WMF
NEW: G0000000
NEW: 0.0X
NEW: B0705254
NEW: 2.16:16
NEW: B0705370
NEW: 2.00
Exit(0)
B146S924.WMF
B147/B149/B190