Installation Procedure - Gestetner B147 Service Manual

Installation Procedure

[G]
[F]
1. Make two holes [A] in the scanner left cover.
2. Attach the bracket [B] enclosed with the fax unit ( x 2) as shown.
3. Remove the label [C] from the handset cradle [D].
4. Attach the cradle to the bracket [B] ( x 2), then replace the label [C].
5. Install the handset [E] on the cradle.
6. Connect the cable [F] to the "TEL" jack at the rear of the machine.
7. Attach the cable holder [G].
NOTE: The cable holder is distributed with the fax unit (not with the handset).
8. Fix the cable to the holder.
SM
[A]
13
HANDSET
[E]
[D]
[C]
[B]
B603I907.WMF
B603