Gestetner B147 Service Manual page 331

5-128 Code Mode With Key/Card Option
5-128-1 DFU
5-131 Paper Size Type Selection
5-131-1 The program selects a paper size system from the following alternatives: the AB
system (0), the LT system (1), and the AF system (2).
5-150 By-Pass Length Setting
5-150 - 1 Determines whether the transfer sheet from the by-pass tray is used or not.
Normally the paper length for sub scanning paper from the by-pass tray is limited
to 600 mm, but this can be extended with this SP to 1260 mm.
5-162 App. Switch Method
5-162-1 This program specifies the switch that selects an application program.
5-212 Page Numbering
This program adjusts the position of the page numbers.
5-212-3 Duplex Printout Right/Left Position
5-212-4 Duplex Printout High/Low Position
5-302 [Set Time]
Adjusts the RTC (real time clock) time setting for the local time zone.
Examples: For Japan (+9 GMT), enter 540 (9 hours x 60 min.)
NA :-300 (New York)
EU :+ 60 (Paris)
CH :+480 (Peking)
TW :+480 (Taipei)
AS :+480 (Hong Kong)
5-302-2 Set Time
5-404 [User Code Counter Clear]
Clear all counters for users.
5-404-1 UCodeCtrClr
SM
*CTL
*CTL [0: DOM (Japan)/1: USA /2: ERP (Europe)]
*CTL 0: Off, 1: On
*CTL [0: Soft Key Set/1: Hard Key Set]
*CTL
[0 ∼99 / 0 / 1 mm/step]
[0 ∼99 / 0 / 1 mm/step]
*CTL [ -1440 to 1440 / 60 / 1 min./step ]
#
[0 to 1 / 1 / 0/step]
0: Not executed
1: Executed
5-43
COPY SERVICE MODE
B147/B149/B190