Gestetner B147 Service Manual page 141

4. Install the drive pulley on
the shaft [A].
NOTE: Do not secure the
pulley to the shaft
with the screw yet.
5. Insert the left end into the
slit [B], with the end going
via the rear track of the left
pulley [C] and the rear
track of the movable pulley
[D].
6. Hook the right end onto
the front scanner wire
bracket [E], with the end
going via the front track of
the right pulley [F] and the
front track of the movable
pulley [G].
NOTE: Do not secure the
scanner wire bracket
with the screw yet.
SM
[C]
[B]
[G]
3-27
SCANNER UNIT
[D]
B146R142.WMF
[A]
[E]
B146R143.WMF
[F]
B147/B149/B190