Job Spooling - Gestetner B147 Service Manual

PRINTER FUNCTIONS

6.14.5 JOB SPOOLING

Print data can be spooled (stored) in the machine's HDD, and the machine starts to
print when data transfer is complete. Since the machine stores all data first before
printing, the host computer is freed up more quickly.
NOTE: 1) The supported print protocols are IPP and LPR.
2) The default setting for this feature is 'off'. The user must switch it on
using UP mode to enable this feature.
• The size of the HDD partition for job spooling is 1 GB.
• The partition can hold up to 150 jobs.
Related SP Modes
Job spooling can be turned on and off using the SP mode (SP5-828-069) for each
protocol.
The machine does not spool jobs when job spooling is switched off with the SP
mode, even when the customer switches it on with the user mode.
SM 6-109 B147/B149/B190