Gestetner B147 Service Manual page 63

[A]
8. Remove the platen sheet [A] and place
it on the exposure glass [B].
9. Align the rear left corner (of the platen
sheet) flush against the corner [C] on
the exposure glass.
10. Close the ARDF.
11. Open the ARDF and check that the
platen sheet is correctly attached.
12. Attach the decal [D] with the arrow (on
the decal) pointing at the ARDF
exposure glass.
13. Attach the decal [E] on the top.
14. Turn the main switch on, and check
the operation.
15. Make a full size copy, and check that
the registrations (side-to-side and
leading edge) and image skew are
correct. If they are not, adjust the
registration and image skew with SP
mode.
SM
[C]
[B]
G564I102.WMF
1-29
OPTIONAL UNIT
B146I931.WMF
[D]
[E]
G564I105.WMF
G564I106.WMF
B147/B149/B190