Gestetner B147 Service Manual page 336

COPY SERVICE MODE
5-821 [CSS-PI Device Co]
5-821-1 CSS-PI Device Co
5-821-2 RCG IP Address
5-824 [NV-RAM Data Upload]
Uploads the UP and SP mode data (except for counters and the serial number) from
the NVRAM to a flash memory card.
5-824-1
5-825 [NV-RAM Data Download]
Downloads the UP and SP mode data from a flash memory card to the NVRAM
5-825-1 NvramDownload
5-828 [Network Setting]
5-828-66 Job Spooling Clear: Start
Time
5-828-69 Job Spooling (Protocol)
5-828-74 Delete Password
5-828-84 Print Settings List
5-828-90 TELNET (0: OFF 1: ON)
5-828-91 Web (0: OFF 1: ON)
5-828-115 SMB Computer Name
5-828-116 SMB Work Group Name
B147/B149/B190
*CTL [ 0 to 4 / 0 / 1/step] DFU
# [0 to 1 / 0 / 1/step]
0: Not executed
1: Executed
# [0 to 1 / 0 / 1/step]
0: Not executed
1: Executed
*CTL Treatment of the job when a spooled job exists
at power on.
0: Data is cleared
1: Automatically printed
Validates or invalidates the job spooling
function for each protocol.
0: Validates
1: Invalidates
bit0: LPR
bit1: FTP
bit2: IPP
bit3: SMB
bit4: BMLinkS
bit5: DIPRINT
bit6: (Reserved)
bit7: (Reserved)
Deletes passwords.
Prints the NCS parameter list
Validates or invalidates the Telnet protocol.
Enables or disables the Web operation.
Specifies the SMB computer name.
Specifies the SMB workgroup name.
5-48 SM