DRIVE UNIT
3.14.3 DEVELOPMENT MOTOR - CMY
[A]
B146R946.WMF
1. Rear cover (
3.5.1)
2. Swing out the controller box (
3.13.1).
3. Drum gear cover [A] ( x 2, x 5)
[B]
[C]
[E]
[D]
B146R947.WMF
4. Turn the drum gears [B] counterclockwise, so the shoulder screws [C][D] are in
the three, seven, or eleven o'clock position.
NOTE: By doing that, you can align the three corners of each drum-gear shaft to
the three openings on the development-clutch securing plate [E].
SM
3-77
B147/B149/B190