Gestetner B147 Service Manual page 299

1-902 [Paper Size] Tray Paper Size
1-902-1 Tray 1 A4/LT
Specifies the paper size for tray 1.
1-902-2 Tray 2 B4/LG
Specifies the paper size for tray 2.
1-902-3 Tray 2 A4/LT
Specifies the paper size for tray 2.
1-902-4 Tray 2 B5/LT
Specifies the paper size for tray 2.
1-910 [Fusing Idling Time]
Specifies the timer for deciding whether to do fusing idling when receiving a print
command.
When receiving a new job within the time specified in this SP mode after the last job
is completed, fusing idling is not done because the fusing section was already
warmed up during the last job.
1-910-1 Idling Time
SM
*BCU [ 0 or 1 / 0 / - ] Alphanumeric
0: A4 sideways, 1: LT sideways
Tray 1 can only use these two sizes.
US: 1 FA
*BCU [ 0 or 1 / 0 / - ] Alphanumeric
0: B4 lengthwise, 1: LG lengthwise
This specifies which size is detected for a
sensor output of 1101 (see section 6 for
details).
US: 1 FA
*BCU [ 0 or 1 / 0 / - ] Alphanumeric
0: A4 lengthwise, 1: LT lengthwise
This specifies which size is detected for a
sensor output of 0110 (see section 6 for
details).
US: 1 FA
*BCU [ 0 or 1 / 0 / - ] Alphanumeric
0: LT, 1: B5 lengthwise
This specifies which size is detected for a
sensor output of 1011 (see section 6 for
details).
*BCU [ 0 to 180 / 1 / 1 minute/step ] DFU
5-11
COPY SERVICE MODE
B147/B149/B190